| LM522548 LM52251 Timken Tapered Roller Bearings | L:70 mm; Bearing:YAR 205-015-2RF/VE49; Limiting speed:7000 r/min; B4:5 mm; Thread grub screw G2:1/4-28 UNF; Recommended diameter for attachment bolts, mm G:10 mm; Recommended diameter for attachment bolts, inch G:0.375 in; A5:26 mm; s1:19.8 mm; Hexagonal key size for grub screw N:3.175 mm; T:38.8 mm; H:124 mm; B:34.1 mm; A:30 mm; Basic dynamic load rating C:14 kN; N:12.3 mm; J:99 mm; Basic static load rating C0:7.8 kN; |
| JLM714149 JLM71411 Timken Tapered Roller Bearings | Pa:3.09 kN; S:2.778 mm; h:24.606 mm; Initial grease fill:25.515 g; Max. speed for Taconite seal:2175 r/min; R2:12.7 mm; H1:57.15 mm; Cap bolt:2 x 7/16-14 UNC; Cap bolt recommended tightening torque:61 N·m; P60°:20.9 kN; A1:60.325 mm; H2:20.637 mm; P90°:12.5 kN; J min.:158.75 mm; RG:1/8 NPT; N1:15.875 mm; Taconite seal:TER 17; Da:85.001 mm; da:36.513 mm; ba:24.606 mm; |
| LM757049 LM75701 Timken Tapered Roller Bearings | d:100 mm; r, r1,2 min.:1.1 mm; B:40 mm; Mass inner ring:0.8 kg; F:115 mm; |
| LM48548 LM4851 Timken Tapered Roller Bearings | Recommended diameter for attachment bolts, inch G:0.375 in; Da:93.7 mm; Thread grub screw G2:M5; L:108 mm; Limiting speed:1200 r/min; Recommended diameter for attachment bolts, mm G:10 mm; Recommended tightening torque for grub screw:4.2 N·m; A1:13 mm; B1:37 mm; A3:3.2 mm; Db2:84 mm; Fatigue load limit Pu:0.475 kN; N:11.5 mm; N4:4 mm; Mass bearing unit:1.05 kg; Hexagonal key size for grub screw N:2.5 mm; |
| 9278 922 Timken Tapered Roller Bearings | Initial grease fill:379.89 g; Cap bolt:5/8-11 UNC; P120°:94.3 kN; Mass pillow block:60.3 kg; J1:69.85 mm; Da:210 mm; H1:133.35 mm; A2:250.825 mm; H:257.175 mm; A1:120.65 mm; PG:1/4 NPT; Taconite seal:TER 121; R2:30.163 mm; Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.75 in; RG:1/2 NPT; Eye bolt:2 x 3/8-16 UNC; L:419.1 mm; J max.:368.3 mm; Max. speed for Taconite seal:625 r/min; |
| JM822049 JM82201 Timken Tapered Roller Bearings | A5:22 mm; N:21 mm; J min.:119 mm; A:45 mm; J6:146 mm; Recommended tightening torque for grub screw:7.4 N·m; L:160 mm; Recommended diameter for attachment bolts, mm G:12 mm; N1:14 mm; Recommended diameter for attachment bolts, inch G:0.5 in; Housing:SY 507 M/VZ033; A1:27 mm; B1:39.5 mm; s1:24.3 mm; Basic static load rating C0:15.3 kN; d:34.925 mm; H2:19 mm; Thread grub screw G2:M6; Fatigue load limit Pu:0.655 kN; |
| K37425 K37625 Timken Tapered Roller Bearings | h:225 mm; Basic static load rating C0:360 kN; dk:80 mm; Mass rod end:6.25 kg; C1 max.:39 mm; Basic dynamic load rating C:245 kN; d2 max.:137 mm; Specific dynamic load factor K:100 N/mm²; G:M 60x4; r1 min.:1 mm; l7 min.:73 mm; l1 min.:120 mm; B:44 mm; Material constant KM:330; d:60 mm; l2 max.:296 mm; α:6 °; |
| HM212049 HM212011 Timken Tapered Roller Bearings | Db2:84 mm; Housing material:Cast iron; J7:24.5 mm; N:11.5 mm; Mass bearing unit:1 kg; Recommended diameter for attachment bolts, inch G:0.375 in; N4:4 mm; B1:37 mm; RG:1/4-28 UNF; Recommended tightening torque for grub screw:4.2 N·m; Housing:FY 506 M/VZ033; Hexagonal key size for grub screw N:2.5 mm; A:32.5 mm; J:82.5 mm; A1:13 mm; L:108 mm; Limiting speed:1200 r/min; Da:93.7 mm; J6:96 mm; Basic dynamic load rating C:19.5 kN; |
| HH224340 HH22431 Timken Tapered Roller Bearings | L:387.35 mm; H2:44.45 mm; Appropriate attachment bolt size G:0.875 in; Cap bolt recommended tightening torque:515.2 N·m; Mass pillow block:31.4 kg; ba:38.894 mm; RG:3/8 NPT; Cap bolt:2 x 3/4-10 UNC; H:222.25 mm; h:47.625 mm; Da:180 mm; R2:30.163 mm; PG:1/4 NPT; da:76.2 mm; A1:111.125 mm; P180°:38.3 kN; Taconite seal:TER 185; J min.:295.275 mm; H1:114.3 mm; J max.:333.375 mm; |
| EE277455 277565 Timken Tapered Roller Bearings | Reference speed:1700 r/min; C:14 mm; D3:155 mm; Basic dynamic load rating C:119 kN; Mass bearing (including seat washer where applicable):2.7 kg; Limiting speed:2400 r/min; s:52 mm; D1 ≈:103 mm; da min.:130 mm; Minimum load factor A:0.62; ra max.:1 mm; d1 ≈:150 mm; Fatigue load limit Pu:10.8 kN; Basic static load rating C0:325 kN; D2:125 mm; H:40.9 mm; D:150 mm; H1:45 mm; R:112 mm; Da max.:125 mm; |
| No. | Brand | F | B | K | R | h | b | C | M |
| HH224340 HH22431 | Timken | - | - | - | - | 47.625 mm | - | - | - |
| JM720249 JM72021 | Timken | 66 mm | 21 mm | - | - | - | - | - | - |
| 42375 42584 | Timken | - | 180 mm | 12 mm | - | - | 22.3 mm | - | - |
| H917840 H91781 | Timken | - | - | - | - | - | - | - | - |
| X32226M Y32226M | Timken | - | 13 mm | - | - | - | - | - | - |
| JM734449 JM73441 | Timken | - | 44 mm | - | - | 210 mm | - | - | - |
| HH221449 HH22141 | Timken | - | 243 mm | 9 mm | - | - | 16.7 mm | - | - |
| 74525 7485 | Timken | - | - | 7.5 mm | - | - | - | - | - |
| HM926749 HM92671 | Timken | - | - | - | - | 51.594 mm | - | - | - |
| HM903249 HM90321 | Timken | - | 50 mm | - | - | 26 mm | - | - | - |
| 3979 3925 | Timken | - | - | - | - | 42.862 mm | - | - | - |
| 470975 470132 | Timken | - | - | - | - | 38.1 mm | - | - | - |
| LM757049 LM75701 | Timken | 115 mm | 40 mm | - | - | - | - | - | - |
| 39590 3952 | Timken | - | 60 mm | - | - | 31 mm | - | - | - |
| 67790 6772 | Timken | - | - | 12 mm | - | - | 22.3 mm | - | - |
| 27689 2762 | Timken | - | - | - | - | - | - | - | - |
| 95475 95925 | Timken | - | - | - | - | 51.594 mm | - | - | - |
| HH926744 HH926716 | Timken | - | - | - | - | - | - | - | - |
| JM736149 JM73611 | Timken | - | - | - | - | 79.375 mm | - | - | - |
| X30216M Y30216M | Timken | - | - | - | - | - | - | - | - |
| JM718149 JM71811 | Timken | - | - | - | - | - | - | - | - |
554 552A Timken Tapered Roller Bearings Video
What do you know about Tapered Roller Bearings? | Bearing
Jan 15, 2015 - Tapered roller bearings feature tapered inner and outer ring raceways with tapered rollers arranged between them, angled so the surface of the
Tapered Roller Bearings | Fersa Bearings
Thrust tapered roller bearing, also known as T type bearings, allow for very compact axial arrangements, able to endure large axial loads. It is distinguished by its
Tapered Roller Bearings | Roller Bearings | Products | NSK
Bearings of this type use conical rollers guided by a back-face rib on the cone. These bearings are capable of taking high radial loads and axial loads in one
Tapered Roller Bearings | NTN Bearing
Tapered roller bearings utilize conical rollers and raceways, arranged so that the rollers and raceways meet at a common apex. The rollers are guided by
Tapered Roller Bearings | The Timken Company
Timken® Tapered Roller Bearings. Timken® tapered roller bearing assemblies are precisely designed to manage both radial and axial loads, even in the most
Tapered Roller Bearing/Product Information/Koyo Bearings
This page introduces tapered roller bearings. The tapered shape enables a long line contact, making this bearing suitable for applications with heavy load and
Tapered roller bearing - Wikipedia
Tapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces
Tapered roller bearings - features, benefits, applications | SKF
SKF Tapered roller bearings feature a cup and cone assembly. The cup is comprised of the outer ring and the cone assembly consists of inner ring, rollers, and
Tapered Roller Bearings - Large Diameter Tapered Bearings
Tapered roller bearings are used in a variety of industrial applications. The tapered rollers allow the bearings to accommodate heavy radial, axial and