EE277455 277565 Timken Tapered Roller Bearings | Reference speed:1700 r/min; C:14 mm; D3:155 mm; Basic dynamic load rating C:119 kN; Mass bearing (including seat washer where applicable):2.7 kg; Limiting speed:2400 r/min; s:52 mm; D1 ≈:103 mm; da min.:130 mm; Minimum load factor A:0.62; ra max.:1 mm; d1 ≈:150 mm; Fatigue load limit Pu:10.8 kN; Basic static load rating C0:325 kN; D2:125 mm; H:40.9 mm; D:150 mm; H1:45 mm; R:112 mm; Da max.:125 mm; |
470975 470132 Timken Tapered Roller Bearings | Ca:49.809 mm; Mass pillow block:22.4 kg; J1:53.975 mm; Cap bolt:2 x 5/8-11 UNC; Housing:FSAF 518; P60°:101 kN; Pa:10.9 kN; R1:60.325 mm; da:82.55 mm; H:192.484 mm; Initial grease fill:141.75 g; H1:101.6 mm; H2:41.275 mm; Bearing limiting speed:5300 r/min; P180°:42.3 kN; Cap bolt, SAE grade:5; J min.:263.525 mm; h:38.1 mm; P150°:34.7 kN; Stabilizing ring:SR-18-15; |
JM716649 JM71661 Timken Tapered Roller Bearings | Da:360 mm; Cap bolt, size:M 24x160; A1:240 mm; P120°:1400 kN; Appropriate attachment bolt, rec. tightening torque:1310 N·m; s:12 mm; H2:90 mm; Bearing (basic designation):23048 K; ba max.:128 mm; Cap bolt, rec. tightening torque:350 N·m; Q150°:1040 kN; Oil seal:TSD 3048 U; N4 max.:20 mm; ba min.:97 mm; Oil level, min.:59 mm; P180°:1600 kN; Pa:1000 kN; Q120°:1800 kN; Mass housing:139 kg; |
HM321245 HM32121 Timken Tapered Roller Bearings | Specific dynamic load factor K:25 N/mm²; h:252.5 mm; Coefficient of friction µ max.:0.15; Mass bushing:25.2 kg; α:124 °; Specific static load factor K0:45 N/mm²; Tolerance housing:H7; D:270 mm; d:250 mm; a:17.5 mm; Permissible sliding velocity v max.:0.5 m/s; B:350 mm; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:e7; Coefficient of friction µ min.:0.08; |
HM926740 HM92671 Timken Tapered Roller Bearings | L:679.45 mm; Labyrinth ring (dc shaft position):LOR 154; Mass pillow block:184 kg; Stabilizing ring:SR-36-30; db:198.438 mm; P90°:207 kN; Eye bolt:2 x 3/8-16 UNC; H1:190.5 mm; A1:180.975 mm; R1:114.3 mm; Housing:SSAFS 236; Cap bolt, SAE grade:8; Cap bolt recommended tightening torque:1220 N·m; P150°:113 kN; Cap bolt:1-8 UNC; End plug (suffix Y):EPR 21; Da:319.999 mm; Pa:73.4 kN; Max. speed for PosiTrac Plus seal:725 r/min; |
H924045 H92401 Timken Tapered Roller Bearings | C:116 mm; Basic static load rating C0:44000 kN; d1 ≈:840 mm; ra max.:8 mm; s:308 mm; Mass bearing:650 kg; da min.:725 mm; D:920 mm; H:236 mm; D1 ≈:686 mm; B:89 mm; r1,2 min.:9.5 mm; d:530 mm; Minimum axial load factor A:180; Fatigue load limit Pu:3100 kN; Basic dynamic load rating C:10500 kN; Da max.:800 mm; B1:228 mm; Limiting speed:630 r/min; Reference speed:320 r/min; |
48393 4832 Timken Tapered Roller Bearings | G:M 30x2; r1 min.:0.6 mm; w:36 mm; C1 max.:20 mm; l3 min.:45 mm; l5 ≈:19 mm; Basic static load rating C0:118 kN; h1:110 mm; α:6 °; dk:40.7 mm; Mass rod end:1 kg; d4 ≈:42 mm; d2 max.:75 mm; B:22 mm; Specific dynamic load factor K:300 N/mm²; l7 min.:36 mm; d:30 mm; l4 max.:149 mm; Basic dynamic load rating C:176 kN; |
H715340 H715311 Timken Tapered Roller Bearings | Calculation factor f2C:1.06; rb max.:0.6 mm; r1,2 min.:1.1 mm; b:1.6 mm; Calculation factor (back-to-back, face-to-face) Y1:0.92; Static axial stiffness, preload class C:287 N/µm; D1:87.72 mm; Db max.:95.8 mm; C1:5.3 mm; Preload class B GB:520 N; Calculation factor f2A:1; C2:3.3 mm; Attainable speed for oil-air lubrication:31000 r/min; Calculation factor (single, tandem) X2:0.41; Calculation factor (back-to-back, face-to-face) X2:0.67; |
683 672 Timken Tapered Roller Bearings | Number of balls z:15; Da max.:35 mm; Calculation factor fHC:1.04; Calculation factor f2B:1.07; r3,4 min.:0.2 mm; Calculation factor f2D:1.18; Static axial stiffness, preload class C:44 N/µm; Fatigue load limit Pu:0.137 kN; r1,2 min.:0.3 mm; B:9 mm; Calculation factor f2C:1.12; Calculation factor f0:9.8; Db max.:35.6 mm; Reference grease quantity Gref:0.45 cm³; Basic dynamic load rating C:6.05 kN; |
LM739749 LM73971 Timken Tapered Roller Bearings | Cap bolt recommended tightening torque:149.1 N·m; A2:123.825 mm; Mass pillow block:11.4 kg; P180°:14.2 kN; J1:50.8 mm; Cap bolt:2 x 1/2-13 UNC; H:157.162 mm; Da:120 mm; P90°:21.4 kN; Initial grease fill:68.04 g; Ca:52.807 mm; Labyrinth ring (db shaft position):LER 40; J max.:241.3 mm; P120°:13.3 kN; RG:1/8 NPT; Appropriate attachment bolt size G:0.5 in; Stabilizing ring:2 x SR-1611; |
No. | Brand | F | B | K | R | h | b | C | M |
JLM714149 JLM71411 | Timken | - | 86 mm | - | - | - | - | - | - |
HM212047 HM212011 | Timken | - | - | - | - | - | - | - | - |
9380 9321 | Timken | - | 16 mm | - | - | 78 mm | - | - | - |
HM231149 HM231115 | Timken | - | - | - | - | - | 11 mm | 85.725 mm | - |
67790 6772 | Timken | - | 30 mm | - | - | - | - | - | - |
H924045 H92401 | Timken | - | 89 mm | - | - | - | - | 116 mm | - |
3979 392 | Timken | - | - | - | - | 87.313 mm | - | - | - |
JM738249 JM73821 | Timken | - | 618 mm | - | - | - | - | - | - |
JM822049 JM82201 | Timken | - | 55 mm | - | - | 295 mm | - | - | - |
98350 98788 | Timken | - | 258 mm | - | - | - | - | - | - |
K37425 K37625 | Timken | - | 44 mm | - | - | 225 mm | - | - | - |
HH932145 HH932115 | Timken | - | 150 mm | - | - | - | - | - | - |
EE350750 351687 | Timken | - | 120 mm | - | - | - | - | - | - |
90381 90744 | Timken | 540 mm | 450 mm | 9 mm | - | - | 16.7 mm | 450 mm | - |
X30220M Y30220M | Timken | 100.5 mm | 28 mm | - | - | - | - | - | - |
5760 5735 | Timken | - | - | - | - | - | - | - | - |
93825 93125 | Timken | - | 180 mm | - | - | - | - | - | - |
JM718149 JM71811 | Timken | - | 73.3 mm | - | - | - | - | - | - |
M244249 M24421 | Timken | - | 55 mm | - | - | - | - | - | - |
LL771948 LL771911 | Timken | - | 254 mm | - | - | - | - | - | - |
JM720249 JM72021 | Timken | 66 mm | 21 mm | - | - | - | - | - | - |
9278 922 | Timken | - | - | - | - | - | - | - | - |
M255449 M25541 | Timken | - | - | - | - | - | - | - | - |
33895 33821 | Timken | - | 42.316 mm | - | - | - | - | - | - |
HH249949H HH24991 | Timken | - | 69.85 mm | - | - | - | - | - | - |
29685 2962 | Timken | - | - | - | - | 61.913 mm | - | - | - |
JM736149 JM73611 | Timken | - | - | - | - | 79.375 mm | - | - | - |
67983 6792 | Timken | - | 106 mm | - | - | - | - | - | - |
544090 544118 | Timken | - | 22.28 mm | - | - | - | - | 17.462 mm | - |
HH923649 HH92361 | Timken | - | 32 mm | - | - | - | - | - | - |
M349549 M34951 Timken Tapered Roller Bearings Video
Tapered Roller Bearings - Large Diameter Tapered Bearings
Tapered roller bearings are used in a variety of industrial applications. The tapered rollers allow the bearings to accommodate heavy radial, axial and
Tapered roller bearing - Wikipedia
Tapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces
Tapered Roller Bearings | The Timken Company
Timken® Tapered Roller Bearings. Timken® tapered roller bearing assemblies are precisely designed to manage both radial and axial loads, even in the most
What do you know about Tapered Roller Bearings? | Bearing
Jan 15, 2015 - Tapered roller bearings feature tapered inner and outer ring raceways with tapered rollers arranged between them, angled so the surface of the
Tapered Roller Bearings | Roller Bearings | Products | NSK
Bearings of this type use conical rollers guided by a back-face rib on the cone. These bearings are capable of taking high radial loads and axial loads in one
Tapered Roller Bearing/Product Information/Koyo Bearings
This page introduces tapered roller bearings. The tapered shape enables a long line contact, making this bearing suitable for applications with heavy load and
Tapered Roller Bearings | Fersa Bearings
Thrust tapered roller bearing, also known as T type bearings, allow for very compact axial arrangements, able to endure large axial loads. It is distinguished by its
Tapered Roller Bearings | NTN Bearing
Tapered roller bearings utilize conical rollers and raceways, arranged so that the rollers and raceways meet at a common apex. The rollers are guided by
Tapered roller bearings - features, benefits, applications | SKF
SKF Tapered roller bearings feature a cup and cone assembly. The cup is comprised of the outer ring and the cone assembly consists of inner ring, rollers, and