| 5760 5735 Timken Tapered Roller Bearings | Grease quantity for relubrication:13 g; H1:112 mm; Calculation factor Y1:2.8; P120°:280 kN; L:380 mm; da:90 mm; A:110 mm; N1:26 mm; Attachment bolt diameter G:24 mm; Tightening torque for attachment bolts:665 N·m; P55°:620 kN; P0°:470 kN; Basic dynamic load rating C:325 kN; J6:355 mm; N4 max.:8 mm; Bearing mean diameter dm:125 mm; P90°:370 kN; P180°:310 kN; Fatigue load limit Pu:39 kN; |
| 6379 632 Timken Tapered Roller Bearings | Calculation factor e:0.95; Calculation factor X:0.6; Da max.:518 mm; a:315 mm; D1 ≈:477 mm; Calculation factor Y1:0.66; Calculation factor A:10.4; D:540 mm; d1 ≈:423 mm; Calculation factor Y0:0.58; Basic dynamic load rating C:852 kN; b:15 mm; da min.:382 mm; d:360 mm; r1,2 min.:5 mm; Basic static load rating C0:1930 kN; Fatigue load limit Pu:38 kN; Mass bearing:70.5 kg; Limiting speed:1700 r/min; |
| HM227545 HM227519 Timken Tapered Roller Bearings | L:330.2 mm; da:73.025 mm; End plug (suffix Y):EPR 9; H1:95.25 mm; Initial grease fill:218.29 g; Cap bolt, SAE grade:5; J1:53.975 mm; P120°:23.1 kN; H:182.166 mm; Pa:7.12 kN; ba:31.75 mm; Appropriate attachment bolt size G:0.625 in; J max.:279.4 mm; Cap bolt:2 x 5/8-11 UNC; h:36.513 mm; R2:22.225 mm; P60°:61.4 kN; Da:150 mm; P90°:36.9 kN; Mass pillow block:16.5 kg; |
| JLM714149 JLM71411 Timken Tapered Roller Bearings | J:320 mm; B:86 mm; P120°:280 kN; H1:112 mm; P0°:470 kN; Limiting speed:1050 r/min; P55°:620 kN; J7:40 mm; Basic static load rating C0:375 kN; Calculation factor Y1:2.8; Mass bearing unit:21 kg; S:2.5 mm; da:90 mm; Fatigue load limit Pu:39 kN; Tightening torque for attachment bolts:665 N·m; P150°:250 kN; J6:355 mm; Grease quantity for relubrication:13 g; Calculation factor e:0.24; |
| HH224334 HH22431 Timken Tapered Roller Bearings | D:24 mm; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ min.:0.03; Specific static load factor K0:200 N/mm²; Coefficient of friction µ max.:0.08; d:20 mm; Mass bushing:0.0078 kg; Permissible sliding velocity v max.:0.5 m/s; Effective load carrying cross section A:560 mm²; Tolerance housing:H7; Tolerance shaft:h8; B:30 mm; Specific dynamic load factor K:140 N/mm²; |
| HM926747 HM92671 Timken Tapered Roller Bearings | J min.:431.8 mm; P120°:87.2 kN; P60°:230 kN; P180°:96.1 kN; Initial grease fill:623.7 g; R2:39.688 mm; Cap bolt:4 x 3/4-10 UNC; RG:3/4 NPT; h:50.8 mm; N1:28.575 mm; Mass pillow block:91.6 kg; Appropriate attachment bolt size G:1 in; Eye bolt:2 x 3/8-16 UNC; Stabilizing ring:SR-30-0; Da:269.999 mm; L:539.75 mm; Ca:82.804 mm; P150°:80.1 kN; Pa:32.7 kN; R1:95.25 mm; |
| HH926744 HH92671 Timken Tapered Roller Bearings | da:40 mm; Da:90 mm; Ca:42.799 mm; Cap bolt, SAE grade:8; Ventilation fitting:38174-12; Max. speed for contact seal:2950 r/min; Pa:8.9 kN; db:49.212 mm; ba:24.606 mm; H2:25.4 mm; J max.:177.8 mm; L:209.55 mm; P150°:11.1 kN; PG:1/8 NPT; Initial grease fill:65.205 g; Housing:SAF 308; A1:60.325 mm; h:30.956 mm; Stabilizing ring:2 x SR-1608; R2:15.875 mm; |
| 938 932 Timken Tapered Roller Bearings | B1:10 mm; h:172 mm; D1:205 mm; d:170 mm; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ min.:0.08; a:3.5 mm; Tolerance shaft:e7; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; Specific static load factor K0:45 N/mm²; B:70 mm; Mass bushing:3.9 kg; Permissible sliding velocity v max.:0.5 m/s; Coefficient of friction µ max.:0.15; α:124 °; |
| HM218248 HM21821 Timken Tapered Roller Bearings | D1 ≈:401.3 mm; Basic dynamic load rating C:559 kN; Calculation factor Y0:0.26; r3,4 min.:2 mm; Reference speed:1400 r/min; Mass bearing:89.4 kg; Calculation factor A:12; a:203 mm; Limiting speed:1500 r/min; Db max.:489 mm; Calculation factor e:1.14; Basic static load rating C0:800 kN; Fatigue load limit Pu:17.6 kN; ra max.:4 mm; Calculation factor Y1:0.55; r1,2 min.:5 mm; d:240 mm; Calculation factor X:0.57; |
| LM48548 LM4851 Timken Tapered Roller Bearings | Recommended diameter for attachment bolts, inch G:0.375 in; Da:93.7 mm; Thread grub screw G2:M5; L:108 mm; Limiting speed:1200 r/min; Recommended diameter for attachment bolts, mm G:10 mm; Recommended tightening torque for grub screw:4.2 N·m; A1:13 mm; B1:37 mm; A3:3.2 mm; Db2:84 mm; Fatigue load limit Pu:0.475 kN; N:11.5 mm; N4:4 mm; Mass bearing unit:1.05 kg; Hexagonal key size for grub screw N:2.5 mm; |
| No. | Brand | F | B | K | R | h | b | C | M |
| L467549 L46751 | Timken | - | - | - | - | - | - | - | - |
| X32028XM Y32028XM | Timken | - | - | - | - | 38.1 mm | - | - | - |
| HH914449 HH914412 | Timken | - | 8 mm | - | - | - | - | - | - |
| HM813846 HM813811 | Timken | - | 20 mm | - | - | - | 1.8 mm | - | - |
| 9386H 9321 | Timken | - | 92.075 mm | - | - | - | - | - | - |
| JM515649 JM51561 | Timken | - | 13 mm | - | - | - | - | - | - |
| 462 453X | Timken | 68 mm | 35 mm | - | - | - | - | - | - |
| 6379 632 | Timken | - | - | - | - | - | 15 mm | - | - |
| 98350 98788 | Timken | - | 258 mm | - | - | - | - | - | - |
| 33287 33462 | Timken | - | - | - | - | - | - | - | - |
| JHM318448 JHM31841 | Timken | - | 30.162 mm | - | - | - | - | 26.949 mm | - |
| LL481448 LL481411 | Timken | - | - | - | - | - | - | - | - |
| H936349 H93631 | Timken | - | - | 7.5 mm | - | - | 10 mm | - | - |
| H247549 H24751 | Timken | - | 73.025 mm | - | - | - | - | - | - |
| HM218248 HM21821 | Timken | - | 95 mm | - | - | - | - | - | - |
| 9380 9321 | Timken | - | - | - | - | - | - | - | - |
| 36690 36626 | Timken | - | - | - | - | - | - | - | - |
| JLM714149 JLM71411 | Timken | - | 86 mm | - | - | - | - | - | - |
| JM716649 JM71661 | Timken | - | 15 mm | - | - | - | - | - | - |
| JM719149 JM719113 | Timken | - | 750 mm | 12 mm | - | - | 22.3 mm | - | - |
| H238148 H23811 | Timken | - | 42.9 mm | - | - | - | - | - | - |
| 45289 45221 | Timken | - | 65.484 mm | - | - | - | - | - | - |
| 554 552A | Timken | - | 35 mm | - | - | 195 mm | - | - | - |
| HM535349 HM53531 | Timken | - | - | - | - | - | - | 40 mm | - |
| JHM522649AC JHM52261 | Timken | - | - | - | - | - | - | - | - |
| JM822049 JM82201 | Timken | - | 55 mm | - | - | 295 mm | - | - | - |
| LL575349 LL57531 | Timken | - | - | - | - | - | - | - | - |
| 938 932 | Timken | - | 22 mm | - | - | - | - | - | - |
| JLM710949C JLM71091 | Timken | - | - | - | - | 51.594 mm | - | - | - |
HH932145 HH93211 Timken Tapered Roller Bearings Video
Tapered Roller Bearings - Large Diameter Tapered Bearings
Tapered roller bearings are used in a variety of industrial applications. The tapered rollers allow the bearings to accommodate heavy radial, axial and
Tapered Roller Bearings | The Timken Company
Timken® Tapered Roller Bearings. Timken® tapered roller bearing assemblies are precisely designed to manage both radial and axial loads, even in the most
What do you know about Tapered Roller Bearings? | Bearing
Jan 15, 2015 - Tapered roller bearings feature tapered inner and outer ring raceways with tapered rollers arranged between them, angled so the surface of the
Tapered Roller Bearing/Product Information/Koyo Bearings
This page introduces tapered roller bearings. The tapered shape enables a long line contact, making this bearing suitable for applications with heavy load and
Tapered roller bearing - Wikipedia
Tapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces
Tapered Roller Bearings | Roller Bearings | Products | NSK
Bearings of this type use conical rollers guided by a back-face rib on the cone. These bearings are capable of taking high radial loads and axial loads in one
Tapered roller bearings - features, benefits, applications | SKF
SKF Tapered roller bearings feature a cup and cone assembly. The cup is comprised of the outer ring and the cone assembly consists of inner ring, rollers, and
Tapered Roller Bearings | NTN Bearing
Tapered roller bearings utilize conical rollers and raceways, arranged so that the rollers and raceways meet at a common apex. The rollers are guided by
Tapered Roller Bearings | Fersa Bearings
Thrust tapered roller bearing, also known as T type bearings, allow for very compact axial arrangements, able to endure large axial loads. It is distinguished by its